DMS-300A Streaming Integrated Amplifier
The DMS-300A brings the best of both worlds together—streaming technology and high-performance amplification, all in one sleek, powerful package. Featuring a discrete Class AB amplifier rated at 75 watts per channel, the DMS-300A delivers the rich, dynamic sound Cary Audio is known for, with the modern convenience of today’s top streaming platforms.
Stream your favorite music with ease via Qobuz Connect, TIDAL Connect, Spotify Connect, AirPlay, and Bluetooth, or take full control of your digital library with Roon Ready and UPnP/DLNA compatibility. Whether you’re connecting via Wi-Fi or Ethernet, the DMS-300A ensures reliable, high-resolution playback every time.
With a full suite of digital and analog inputs and outputs, the DMS-300A integrates seamlessly into any system, whether you’re building from scratch or upgrading your existing setup.
Now available for preorder, with limited quantities in the first production run. Reserve yours today and be among the first to experience the next evolution in streaming.
In stock
SKU
DMS-300A
As low as
$5,995.00
Download the free iOS and Android Control APPS for the DMS-300A.
The DMS-300A is Roon Ready. Start your free trial here.
The following section describes the DMS-300A basic specifications. The specifications are subject to change without notice or obligation.
| Master Clock Jitter | Below measurable levels |
| Digital Sampling Rates (Fs) | 44.1 kHz to 768 kHz |
| Digital Filter | 32-Bit 8x Oversampling Digital Filter |
| Digital/Analog Converters | 1-2 channel AKM Chipset |
| BLUETOOTH | Qualcomm aptX® decoder and transmitter |
| Analog Filter | 3rd Order Bessel |
| Analog SUB Outputs | Single–Ended RCA |
| Digital Outputs | Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16 bit to 24 bit |
| Digital Inputs | USB-A x 3, SD Card x 1 BLUETOOTH In & Out x1 Coaxial x1, Toslink x1 |
| Digital Input Sample Rate | USB operating at Sample Frequency (Fs) from 44.1 kHz to 384 kHz, 16 bit to 32 bit, DSD 64, 128, 256 and 512. BLUETOOTH Sample Frequency (Fs) 48 kHz, 16 bit. Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16bit to 24 bit |
| Control | Trigger output 12VDC x1 IR control x1 |
| Communication | Ethernet Wi-Fi 802.11 b/g/n |
| Power Input | Configured at factory for either 110-120 or 220-240 VAC, 50-60 Hz |
| Power Consumption | 255 Watts |
| Weight | 15 lbs. |
| Dimensions | 3.0" H x 14.2" W x 11.0" D |
POWER AMPLIFIER
| Analog Input | Single-Ended RCA x 3 for Main-In, Line 1, Line 2 3.5mm Stereo Jack x 1 |
| Analog Input Impedance | 10K Ω Unbalanced |
| Power Amplifier Output | 2 x 75W RMS in 8 Ω from 20Hz to 20KHz 2 x 125W RMS in 4 Ω from 20Hz to 20KHz |
| Circuit Type | Solid State, Power MOSFET Transistor, Class A/B |
| Frequency Response | 10Hz – 50KHz +/- 0.1dB (at 10db below rated output power) |
| Distortion (SAMPTE-1M) | <0.5% |
| S/N Ratio | >100dB, “A” Weighted |
| Protections | Full short circuit, thermal, Ultrasonic, RF Signal muting & Current limiter. |
AUDIO (LPCM)
| Frequency Range | 2 Hz - 22 kHz (44.1 kHz) |
| Amplitude Linearity | 0.1 dB (20 Hz – 20 kHz) |
| Phase Linearity | 3 degrees (20 Hz - 20 kHz) |
| Dynamic Range | 117 dB (1 kHz) |
| Signal-to-Noise Ratio | 107 dB (1 kHz) |
| Channel Separation | 106 dB (1 kHz) |
| Total Harmonic Distortion | 0.0004% (1 kHz) |
| Pre-Amp Output Level | 3.0V RMS (220 Ω output impedance) for maximum volume |
NETWORK, USB, SD CARD PLAYBACK
| Playback Format Supply | .dsf, .dff (DSD64, 128, 256, 512), .aif, .aiff, .alac, .flac, .m4a, .mp4, .wav, .ape, .mp3, .aac, .wma, .ogg, .asf |
| Frequency Range | 2 Hz - 100 kHz |
| Signal System | 16, 20, 24, & 32 bit PCM and 1 bit DSD |
| Sampling Frequency | 44.1 kHz to 384 kHz PCM and 2.822MHz – 22.5792 MHz DSD |
| Dynamic Range | 117 dB |
| DSD System Clock | Frequency 22.5792 MHz |
| Signal-to-Noise Ratio | 107 dB |
SPDIF PLAYBACK; COAXIAL, TOSLINK (LPCM)
| Frequency Range | 2 Hz - 80 kHz |
| Signal System | 16, 20, and 24 bit |
| Sampling Frequency | 44.1 kHz to 192 kHz PCM |
| Dynamic Range | 117 dB |
| System Clock | Frequency 22.5792 MH |
| Signal-to-Noise Ratio | 107 dB |
Roon is the most engaging, enjoyable way to browse your music.
Being RoonReady means that Cary Audio network players transparently discover and connect to Roon, with no network configuration, with bit-perfect delivery of audio to your DAC.
Together, Roon and Cary Audio deliver the power, flexibility, and performance benefits of networked audio, with the easiest setup and highest reliability available.
Learn more here: www.roonlabs.com/roonready
No downloads for this product yet.
No professional reviews for this product yet.
