DMC-600SE Digital Music Center

The DMC-600SE Digital Music Center bridges the gap between physical media CDs and newer digital music sources. Say goodbye to the limitations of physical media while embracing a new era of musical enjoyment. The DMC-600SE combines a Redbook CD transport with a USB DAC and additional digital inputs, including optical, coaxial, AES/EBU, and Bluetooth—a harmonious blend of tradition and innovation.

Distinguished by premium-grade components and three AKM DACs, the DMC-600SE delivers unparalleled processing power across eight channels. Whether for professional use or personal indulgence, its clock input/output ensures precision timing and unrivaled performance. Plus, enjoy the flexibility of fully balanced XLR and RCA outputs, complemented by both solid-state and vacuum tube output stages, allowing you to tailor your sound to perfection.

With up to seven selectable levels of PCM/DSD upsampling, the DMC-600SE empowers you to customize your audio experience like never before. Whether you seek the clarity of high-resolution PCM or the warmth of analog tubes, this powerhouse device caters to every preference, and every note resonates with brilliance.

In stock

SKU

DMC-600SE

Retail $7,995.00

Factory Direct $5,996.00

Sale $4,797.00

Details

The following section describes the DMC-600SE basic specifications. The specifications are subject to change without notice or obligation.

CD Mechanism	Triple-beam laser, multi-speed CD transport
Formats	CD AUDIO (CD-DA), CD-R, CD-RW
Master Clock Jitter	Below measurable levels
Digital Sampling Rates (Fs)	44.1kHz to 768kHz
Digital Filter	8x Oversampling Digital Filter
Digital/Analog Converters	(1) 4 channel AK4495EQ and (2) 2 channel AK4490EQ for true balanced and single ended outputs
BLUETOOTH	CSR bluetooth v 4.0 with aptX low latency audio decoder
Analog Filter	3rd Order Bessel
Analog Outputs	Balanced XLR , Single – Ended RCA
Digital Outputs	Coaxial, Toslink operating Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16 to 24 bit
Digital Inputs	USB x 1 (PC & MAC) BLUETOOTH x1 AES/EBU x1, Coaxial x2, Toslink x1 Master Clock Loop x1
Digital Input Sample Rate	USB: operating Sample Frequency (Fs) from 44.1 kHz to 384 kHz, 16 bit to 32 bit, DSD 64, and DSD 128 BLUETOOTH: Sample Frequency (Fs) 44.1 kHz, 16 bit AES/EBU, Coaxial, Toslink: operating Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16 to 24 bit
Tube Compliment	12au7 x 2
Control	Trigger input 12VDC x1 IR control x1
Communication	RS232 full remote configuration interface
Power Input	Configured at factory for either 110-120 or 220-240 VAC, 50-60 Hz
Power Consumption	86 Watts
Finish	Black powder coated matte chassis with silver or black aluminum faceplate
Weight	35 lbs
Dimensions	5.25″ H x 17.25″ W x 16.25 ” D

AUDIO (CD)

Frequency Range	2 Hz – 22 kHz (44.1 kHz)
Amplitude Linearity	0.1 dB (20 Hz – 20 kHz)
Phase Linearity	3 degrees (20 Hz – 20 kHz)
Dynamic Range	121 dB (1 kHz)
Signal to Noise Ratio	113 dB (1 kHz)
Channel Separation	106 dB (1 kHz)
Total Harmonic Distortion	0.0004% (1 kHz)
Audio Output Level	2.0V RMS (220 Ω output impedance) for Volume in 0.0dB 3.0V RMS (220 Ω output impedance) for Volume in +8.0dB
Balanced XLR Output	+/- 2.0V RMS (440 Ω output impedance) for Volume in 0.0dB +/- 3.0V RMS (440 Ω output impedance) for Volume in +8.0dB

PC-USB Playback (PCM & DSD)

Frequency Range	2 Hz – 100 kHz
Signal System	16, 20, 24, & 32 bit PCM and 1 bit DSD
Sampling Frequency	44.1 kHz to 384 kHz PCM and 2.822MHz – 11.288 MHz DSD
Dynamic Range	123 dB
DSD System Clock	Frequency 22.5792 MHz
Signal to Noise Ratio	112 dB
Audio Output Level	2.0V RMS (220 Ω output impedance) for Volume in 0.0dB 3.0V RMS (220 Ω output impedance) for Volume in+8.0dB
Balanced XLR Output	+/- 2.0V RMS (440 Ω output impedance) for Volume in 0.0dB +/- 3.0V RMS (440 Ω output impedance) for Volume in +8.0dB

SPDIF PLAYBACK; COAXIAL, TOSLINK, AES/EBU (PCM)

Frequency Range	2 Hz – 100 kHz
Signal System	16, 20, and 24 bit
Sampling Frequency	44.1 kHz to 192 kHz PCM
Dynamic Range	123 dB
DSD System Clock	Frequency 22.5792 MHz or 24.576 MHz
Signal to Noise Ratio	112 dB
Audio Output Level	2.0V RMS (220 Ω output impedance) for Volume in 0.0dB 3.0V RMS (220 Ω output impedance) for Volume in+8.0dB
Balanced XLR Output	+/- 2.0V RMS (440 Ω output impedance) for Volume in 0.0dB +/- 3.0V RMS (440 Ω output impedance) for Volume in +8.0dB